 |
|
 |
 |
| FC series detectors are made through coupling InGaAs PIN photodiodes with FC connection using lenses. FC series detectors have high response within 1.0¡«1.65µm and the whole response spectral be extend to 0.65¡«1.65µm due to the optimized diode structure. Internal optical attenuator is used for measure higher optical power. The maximum of detectable optical power can get to 25dBm and 30dBm, respectively. FC series are mostly applied for optical measurement. User can select appropriate units according to needed wavelength and linear range. |
| Features |  |
Applications | |
|
|
| Specifications£¨25¡æ£© |
|
| photo-sensitive area(µm) | ¦Õ300µm | ¦Õ500µm | ¦Õ1mm | ¦Õ2mm | ¦Õ3mm | ||||
| Packaging form(see Ordering Information) | FC | ||||||||
| Spectral Response Range(µm) | Normal Spectral Response Range | 1.0¡«1.65 | 1.0¡«1.65 | 1.0¡«1.65 | 1.0¡«1.65 | 1.0¡«1.65 | |||
| Broad Spectral Response Range | 0.65¡«1.65 | 0.65¡«1.65 | 0.65¡«1.65 | 0.65¡«1.65 | 0.65¡«1.65 | ||||
| Response A/W(0V) | 850nm | ¡Ý0.20 | |||||||
| 1310nm | ¡Ý0.75 | ||||||||
| 1550nm | ¡Ý0.80 | ||||||||
| Linear Range dBm(0V) | - | -70¡«+10 | |||||||
| - | -55¡«+25 | ||||||||
| - | -40¡«+30 | ||||||||
| Capacitance pF(-5V) | ¡Ü12 | ¡Ü20 | ¡Ü150 | ¡Ü600 | ¡Ü1200 | ||||
| Dark CurrentnA(-5V) | ¡Ü5 | ¡Ü10 | ¡Ü30 | ¡Ü100 | ¡Ü200 | ||||
| Operating Voltage(V) | 0¡«-10 | ||||||||
| Linearity(dB) | - | - | ¡À0.15 | ¡À0.15 | ¡À0.15 | ||||
| Inserting Deviation(dB) | ¡À0.1 | ¡À0.1 | - | - | - | ||||
| Inserting life(time) | 105 | 105 | - | - | - | ||||
| Highest Unsaturated Power (dBm) | - | - | > +3 | > +3 | > +3 | ||||
| Absolute Maximum Ratings | |||||||||
| Forward Current | 10 | mA | |||||||
| Optical Current | 10 | mA | |||||||
| Reverse Voltage | 25 | V | |||||||
| Power Waste | 100 | mW | |||||||
| Operating Temperature | -40¡«+85 | ¡æ | |||||||
| Storage Temperature | -40¡«+85 | ¡æ | |||||||
| Jointing Condition | 260¡æ, 10sec | ||||||||
| Ordering Information |
|
| Package Dimensions |
|
Package Dimensions
|
| Typical Performance Curves |
 |
 |
Typical Spectral Response Curve£¨PIN30713£© |
Typical Spectral Response £¨PIN30723£© |
 |
 |
C-V Curve |
Id - Vr Characteristic Curve |
| Notes |
| 1. These products belong to the kind of electronic sensitive devices. Please follow extremely rigorou-santi-static techiques when handling. 2. Correctly connect the electric iron to ground when welding pins. Which will avoid the leak electricity destroy the device. 3. Do not curve the pins too much. Otherwise which will break the pins or damage the devices. 4. The ferrule of connector is often inclined to be stained, Suggest to clean with alcohol before usage. |